The Zarduino™ USB Host shield is targeted for our roZetta™ application using the Zarduino-40™ system board and for a specific Home Automation device. Other USB Host shields may work, perhaps with minor modification.

Features:
• USB 2.0 Full-Speed/Low-Speed 12Mbps/1.5Mbps
• Works with 5V or 3V3 system voltage (selected by user set jumpers)
• 5V/300mA VBus supply - overcurrent protected
• 3V3/100mA DIO supply - overcurrent protected
• 7 Digital Inputs, 7 Digital Outputs (3V3)

Simulated Photoview
Right-click, View Image to enlarge

Assembly Diagram

_{Copyright: No part may be reproduced except as authorized by written permission. This restriction extends to reproduction in all media.}